Tuesday 31 July 2012

3 speed conversion



3 speed conversion on BSA star rover. Originaly it had a single speed, Swapped to complete wheel with 3 speed SA hub and grip shift like throttle on motorcycle. It was a simple task but it wasn't straight away, It needed spacing washer for different frame, Modified cable clamp, fitted elbow on cable to follow up-handlebars, It's works well and SA wide ratio hub gives good performance, Only down side is grip shift works the other way to throttle on motorcycle to go high speed ( pull grip goes low gear ) I just wanted same feeling with opening throttle, Probably only a motorcycle rider would feel this way,, anyway you can change your mind in second to get used to it. 3スピード コンバージョン BSA スターローバー、 元々はシングルスピードだったこの車両に スターメイアチャーの3速付きのホイールとグリップシフトを装着、 シンプルに交換するだけかとおもいきやそうでも無く スペーサーがこのフレームに合う様に必要だったり、 ケーブルのクランプやエルボーを加工して取り付けたりと それなりに手間がかかりましたがうまくいきました、 ワイドレシオのハブもいい具合です。 ひとつ残念なのはグリップシフトがバイクのスロットルとは逆で ( 手前に引くとローギアに入る) まあ単純にバイクと同じ様な感覚でスピードアップしたいのてすが、、 バイクに乗っている人だけですねこんなこと思うのは、、 でも頭を入れ替えればすぐに慣れてしまいますけどね。

5 comments:

  1. The joys of Sturmey Archer. (are they still going??)

    ReplyDelete
  2. Yes they are still going, and still making AW hub.
    You can get 8speed hub gear now a days.
    But 3speed is the best for me same as 45 gear box!

    ReplyDelete
  3. マサさん、こちらは既に行き先が決まっております。
    次は3Dに取り組む予定です、お楽しみに。

    ReplyDelete
  4. おお〜〜、そうすか!

    ちょっと残念。結構好きな感じです。

    来週からDirty Whitewallsが来日。多摩川辺りは少し賑やかになりそうです。

    ReplyDelete